100% Original Audio Technica AT2050 Wired Multi-directional Selective Condenser Microphone Studio Microphone Podcast Equipment

Technical Specifications

Components: Externally polarized (DC bias) capacitive
Directivity: cardioid; Omnidirectional; points-of-eight of formula
Frequency response: 20-20,000 Hz
High-pass filter: 80 Hz, 12 dB/octave
Open circuit sensitivity: -42 dB (7.9 mV) at 1V at 1 Pa
Impedance: 120 ohm
Maximum input sound pressure level: 149 dB, 1 kHz at 1% T.H.D.; 159 dB, at 10dB attenuation
Noise: 17 dB sound pressure
Dynamic range (typical value): 132 dB, 1 kHz at the highest sound pressure
Signal to noise ratio: 77 dB, 1 kHz at 1 Pa
Phantom power supply: DC 11-52V, power consumption 3.8 mA typical
Switch: directivity selection; high-pass filter; 10dB attenuation
Weight: 412 grams
Size: 52mm x 170mm (Maximum diameter x length)
Output terminal: Built-in three-pin XLRM cannon male connector
Standard configuration: AT8458 ⅝”-27 connector shockproof microphone stand, ⅝”-27 to ⅜”-16 adapter, protective bag.

Main Features

1. Switchable microphone directivity: cardioid, omni, and figure-8.
2. The double-vibration membrane radio design improves the directivity accuracy and the frequency response range of the microphone.
3. Built-in 80Hz high-pass filter and 10dB attenuation.
4. Manufactured with the advanced electronic technology and craftsmanship level of Audio-Technica Company, maintaining certain strict standards and reliability.
5. Using large-diameter double shock film, gold-plated and vaporized treatment, long-term use can still maintain better characteristics.