Audio Technica Microphone AT2035 Microphone Sing Karaoke Artifact Recording Live Sound Card Condenser Microphone Set

Technical Specifications

Components: fixed charging backplane, electrostatic capacitive type
Directivity: Heart-shaped directivity
Frequency response: 20-20,000 Hz
High-pass filter: 80 Hz, 12 dB/octave
Open circuit sensitivity: -33 dB (22.4 mV) at 1V at 1 Pa
Impedance: 120 ohm
Maximum input sound pressure level: 148 dB, 1 kHz at 1% T.H.D.; 158 dB, at 10dB attenuation
Noise: 12 dB sound pressure
Dynamic range (typical value): 136 dB, 1 kHz at the highest sound pressure
Signal to noise ratio: 82 dB, 1 kHz at 1 Pa
Phantom power supply: DC 11-52V, power consumption 3.8 mA typical
Switch: high pass filter; 10dB attenuation
Weight: 403 grams
Size: 52mm x 170mm (Maximum diameter x length)
Output terminal: Built-in three-pin XLRM cannon male connector
Standard configuration: AT8458 ⅝”-27 connector shockproof microphone stand, ⅝”-27 to ⅜”-16 adapter, protective bag.

Main Features

1. Adopt large-scale radio vibration film, showing smooth, natural and low noise characteristics.
2. It can provide a larger dynamic range and can also handle higher sound pressure levels.
3. Equipped with special shockproof frame to provide better shockproof and isolation function.
4. Built-in 80Hz high-pass filter and 10dB attenuation.
5. The cardioid directional radio design can reduce the noise interference on the side and the rear and provide better isolation.